{"title":"1-1\/4\" Jetter Nozzles","description":"\u003ch2\u003e1-1\/4\" Jetter Nozzles — Large Combination Trucks \u0026amp; Trunk Lines\u003c\/h2\u003e\n\u003cp\u003e1-1\/4\" is the largest standard jetting hose — the size big combination trucks run on interceptors, trunk lines and large storm systems, with nozzle families rated for pipe \u003cstrong\u003eup to 48\"\u003c\/strong\u003e. Nozzles here are heavy by design (the KEG Sewer runs 17–22 lb) so they hold the bottom of the pipe and put their water into the wall instead of flailing. Efficiency compounds fastest at this scale — see \u003ca href=\"\/pages\/nassco-tier-3-jetter-nozzles\"\u003ewhat NASSCO Tier 3 means\u003c\/a\u003e before writing a spec.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOrderable online:\u003c\/strong\u003e \u003cstrong\u003e1-1\/4\" Victory Line\u003c\/strong\u003e Sewer, Traction, Large Rambo and Large Quattro — list price shown, \u003cstrong\u003e20% off automatically on card orders\u003c\/strong\u003e, 30% off list for approved dealers, Net 30\/PO at list.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the KEG industrial range:\u003c\/strong\u003e factory-checked \u003cstrong\u003edemo\/used Torpedo (97% rated efficiency) and Sewer (80%+)\u003c\/strong\u003e units at contractor prices, quote-first. For new Royal 1-1\/4\" (12\"–48\" pipe), OMG and other industrial pieces, or standing fleet programs: \u003ca href=\"\/pages\/wholesale\"\u003ewholesale \u0026amp; Net 30\u003c\/a\u003e · \u003ca href=\"\/pages\/for-municipal\"\u003emunicipal purchasing\u003c\/a\u003e — POs accepted, printable spec sheets on every product page, W-9 and origin documentation on request.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing:\u003c\/strong\u003e large sanitary\/storm cleaning = Sewer; heavy steady cleaning = Torpedo; long pulls = Traction; blockages at scale = Large Rambo. Running 1\" hose instead? \u003ca href=\"\/collections\/1-inch-jetter-nozzles\"\u003e1\" nozzles\u003c\/a\u003e. Talk to sales about sizing to your truck: \u003ca href=\"tel:8648046637\"\u003e(864) 804-6637\u003c\/a\u003e · \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"1-1-4-inch-victory-line-sewer-nozzle","title":"1-1\/4\" Victory Line Sewer Nozzle","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1-1\/4\" Victory Line Sewer Nozzle uses a high-efficiency rear-jet pattern that flushes debris and restores full-bore flow. Built for 10\"–24\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 10\"–24\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924121870704,"sku":"109042-C","price":1063.52,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924121903472,"sku":"109042-S","price":871.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/0c49bd6140c5862284b551f4cb41afa5.png?v=1782764061"},{"product_id":"1-1-4-inch-victory-line-traction-nozzle","title":"1-1\/4\" Victory Line Traction Nozzle","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1-1\/4\" Victory Line Traction Nozzle uses a forward jet plus angled rear jets that pull the hose deep into the line while cleaning. Built for 10\"–24\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 10\"–24\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924121969008,"sku":"109016-C","price":764.19,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924122001776,"sku":"109016-S","price":658.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/8efa9f38a3d849274060809dd9af6260.png?v=1782764066"},{"product_id":"1-1-4-inch-victory-line-large-quattro-nozzle-w-forward-chisel","title":"1-1\/4\" Victory Line Large Quattro Nozzle w\/ Forward (Chisel)","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1-1\/4\" Victory Line Large Quattro Nozzle w\/ Forward (Chisel) uses four concentrated chisel jets plus a forward jet that break up hardened deposits and scale. Built for 10\"–24\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 10\"–24\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924122886512,"sku":"109061-C","price":1301.88,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924122919280,"sku":"109061-S","price":1120.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/b8f2431e4d116892e6765cd46ffd2368.png?v=1782764080"},{"product_id":"1-1-4-inch-victory-line-large-rambo-nozzle","title":"1-1\/4\" Victory Line Large Rambo Nozzle","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1-1\/4\" Victory Line Large Rambo Nozzle uses a wedge body with drill point and rear jets that dissolve blockages from within. Built for 10\"–24\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 10\"–24\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924123017584,"sku":"109067-C","price":1301.88,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924123050352,"sku":"109067-S","price":1120.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/fac514c515bece52e8b695a6888e1b4b.png?v=1782764085"},{"product_id":"keg-demo-one-and-quarter-inch-torpedo-nozzle","title":"1-1\/4\" KEG Torpedo Nozzle — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1-1\/4\" KEG Torpedo Nozzle — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A weighted, aerodynamic body keeps the nozzle low and stable while eight jets at 12° and 18° strip the wall.\u003c\/p\u003e\u003cp\u003eTier Three Fluid Mechanics — over 95% efficient (catalog cover cites 97%).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 10\"–24\" pipe\u003c\/li\u003e\n\u003cli\u003e8 jets at 12° \u0026amp; 18°\u003c\/li\u003e\n\u003cli\u003eSteel or replaceable titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Three Fluid Mechanics, over 95% efficient\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eCleaning 6\"–16\" lines (usable to 32\"), high-efficiency maintenance passes.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924221878640,"sku":"0010 0032-C","price":1593.16,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924221911408,"sku":"0010 0032-S","price":1394.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_175.png?v=1781796886"},{"product_id":"keg-demo-one-and-quarter-inch-sewer-nozzle","title":"1-1\/4\" KEG Sewer Nozzle — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1-1\/4\" KEG Sewer Nozzle — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A weighted body (17–22 lb depending on size) with 10 or 12 jets at 15° and 20° drags debris back and restores full-bore flow.\u003c\/p\u003e\u003cp\u003eTier Three Fluid Mechanics — over 80% efficient.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 10\"–24\" pipe\u003c\/li\u003e\n\u003cli\u003e10 or 12 jets at 15° \u0026amp; 20°\u003c\/li\u003e\n\u003cli\u003eSteel or replaceable titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Three Fluid Mechanics, over 80% efficient\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eSanitary sewer mains, debris flushing, and long-run line maintenance in pipe up to 24\".\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924222009712,"sku":"0010 0042-C","price":1494.17,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924222042480,"sku":"0010 0042-S","price":1233.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_177.png?v=1781796890"},{"product_id":"keg-demo-one-and-quarter-inch-quattro-nozzle-with-forward-jets","title":"1-1\/4\" KEG Quattro Nozzle With Forward Jets — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1-1\/4\" KEG Quattro Nozzle With Forward Jets — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e Four forward jets penetrate while three sharp body edges mechanically break apart deformed pipe, sand, mud, roots, and packed debris; rear jets flush the loosened material back.\u003c\/p\u003e\u003cp\u003eTier One or Tier Two efficiency depending on size and insert configuration.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 10\"–24\" pipe\u003c\/li\u003e\n\u003cli\u003e4 forward jets + 3 sharp cutting edges\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel body\u003c\/li\u003e\n\u003cli\u003eSteel or titanium ceramic inserts (−S \/ −C; smaller sizes factory-drilled)\u003c\/li\u003e\n\u003cli\u003eTier One–Two per size\/insert\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eTotal blockages, deformed pipe, roots, sand, and mud.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924222206320,"sku":"0010 0060-C","price":924.99,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924222239088,"sku":"0010 0060-S","price":789.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_179.png?v=1781796892"},{"product_id":"keg-demo-one-and-quarter-inch-rambo-nozzle-with-forward-jets-and-drill-point","title":"1-1\/4\" KEG Rambo Nozzle With Forward Jets And Drill Point — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1-1\/4\" KEG Rambo Nozzle With Forward Jets And Drill Point — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A wedge-shaped body with a removable drill point (three rear-spraying jets) plus a forward jet dissolves blockages from within — the strongest penetrator in the industry. Pull the drill point and drop in a standard insert for thrust-only mode.\u003c\/p\u003e\u003cp\u003eTier Two Nozzle (3\/4\"+); smaller sizes are Tier One.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 10\"–24\" pipe\u003c\/li\u003e\n\u003cli\u003eWedge body with removable\/replaceable drill point\u003c\/li\u003e\n\u003cli\u003eThree rear jets + forward jet\u003c\/li\u003e\n\u003cli\u003eSteel or titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Two (3\/4\"+), Tier One on smaller sizes\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eTotal blockages, root masses, grease plugs, and emergency service calls. Sanitary and storm.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924222796144,"sku":"0010 0064-C","price":984.4,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924222828912,"sku":"0010 0064-S","price":848.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_181.png?v=1781796896"},{"product_id":"keg-demo-one-and-quarter-inch-rotor-nozzle","title":"1-1\/4\" KEG Rotor Nozzle — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1-1\/4\" KEG Rotor Nozzle — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A free-spinning head covers the wall in 360°, stripping the last grease film, tender roots, and scale a rear-jet nozzle leaves behind. The reversible barrel also flushes forward — the only finishing nozzle in the industry that does. Water-driven, no lubrication required.\u003c\/p\u003e\u003cp\u003eTier Two Fluid Mechanics. Not a cleaning nozzle — run it last.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 10\"–24\" pipe\u003c\/li\u003e\n\u003cli\u003eFree-spinning 360° head, reversible barrel\u003c\/li\u003e\n\u003cli\u003eWater-driven, no lubrication required\u003c\/li\u003e\n\u003cli\u003eSteel or titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Two Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003ePre-camera inspection finishing, grease and scale removal, small root remnants.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924223091056,"sku":"0010 0074-C","price":1463.88,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924223123824,"sku":"0010 0074-S","price":1327.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_183.png?v=1781796899"},{"product_id":"keg-demo-one-and-quarter-inch-sewer-flush-nozzle","title":"1-1\/4\" KEG Sewer Flush Nozzle — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1-1\/4\" KEG Sewer Flush Nozzle — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e Rear jets at 15° and 25° generate strong propulsion to move debris back to the evacuation point — flush and move, not penetrate.\u003c\/p\u003e\u003cp\u003eTier Two Fluid Mechanics.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 10\"–24\" pipe\u003c\/li\u003e\n\u003cli\u003eRear jets at 15° \u0026amp; 25°\u003c\/li\u003e\n\u003cli\u003eSteel or replaceable titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Two Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRoutine flushing, debris clearance, residential laterals and light commercial mains.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924223320432,"sku":"0010 0104-C","price":722.99,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924223353200,"sku":"0010 0104-S","price":571.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_186.png?v=1781796902"},{"product_id":"keg-demo-one-and-quarter-inch-egg-devastator-with-four-forward-jets","title":"1-1\/4\" KEG Egg Devastator With Four Forward Jets — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1-1\/4\" KEG Egg Devastator With Four Forward Jets — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e Four forward jets at 30° plus three rear jets drive through blockages from the front while the rounded, 300-series hardened stainless body navigates bends and offsets.\u003c\/p\u003e\u003cp\u003eTier Two Fluid Mechanics.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 10\"–24\" pipe\u003c\/li\u003e\n\u003cli\u003e4 forward jets at 30° + 3 rear jets\u003c\/li\u003e\n\u003cli\u003e300-series hardened stainless steel body\u003c\/li\u003e\n\u003cli\u003eSteel or titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Two Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eResidential laterals with bends, service-line blockages, and total blockage removal.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924223811952,"sku":"0010 0223-C","price":561.16,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924223844720,"sku":"0010 0223-S","price":448.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_192.png?v=1781796911"},{"product_id":"keg-demo-one-and-quarter-inch-floor-cleaner-10-jet-with-swivel","title":"1-1\/4\" KEG Floor Cleaner, 10 Jet, With Swivel — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1-1\/4\" KEG Floor Cleaner, 10 Jet, With Swivel — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A self-righting roll-cage design with a fillable weight port keeps jets aimed at the invert to clear sludge, mud, rock, brick, and concrete from storm lines, culverts, and large sanitary mains.\u003c\/p\u003e\u003cp\u003eTier Three Fluid Mechanics (Model A is Tier Two).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 10\"–24\" pipe\u003c\/li\u003e\n\u003cli\u003eSelf-righting roll-cage body, fillable weight port\u003c\/li\u003e\n\u003cli\u003eM14 inserts, steel or titanium ceramic (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eAvailable with swivel\u003c\/li\u003e\n\u003cli\u003eTier Three Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBottom cleaning of large storm and sanitary lines, culverts, and debris-loaded mains.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924224991600,"sku":"0010 0123-C","price":3300.44,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924225024368,"sku":"0010 0123-S","price":3102.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_230.png?v=1781796928"},{"product_id":"keg-demo-one-and-quarter-inch-floor-cleaner-12-jet-with-swivel","title":"1-1\/4\" KEG Floor Cleaner 12 Jet, With Swivel — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1-1\/4\" KEG Floor Cleaner 12 Jet, With Swivel — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A self-righting roll-cage design with a fillable weight port keeps jets aimed at the invert to clear sludge, mud, rock, brick, and concrete from storm lines, culverts, and large sanitary mains.\u003c\/p\u003e\u003cp\u003eTier Three Fluid Mechanics (Model A is Tier Two).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 10\"–24\" pipe\u003c\/li\u003e\n\u003cli\u003eSelf-righting roll-cage body, fillable weight port\u003c\/li\u003e\n\u003cli\u003eM14 inserts, steel or titanium ceramic (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eAvailable with swivel\u003c\/li\u003e\n\u003cli\u003eTier Three Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBottom cleaning of large storm and sanitary lines, culverts, and debris-loaded mains.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924225352048,"sku":"0010 0124-C","price":3499.16,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924225384816,"sku":"0010 0124-S","price":3132.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_234.png?v=1781796935"},{"product_id":"keg-demo-one-and-quarter-inch-floor-cleaner-14-jet-swivel","title":"1-1\/4\" KEG Floor Cleaner, 14 Jet, Swivel — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1-1\/4\" KEG Floor Cleaner, 14 Jet, Swivel — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A self-righting roll-cage design with a fillable weight port keeps jets aimed at the invert to clear sludge, mud, rock, brick, and concrete from storm lines, culverts, and large sanitary mains.\u003c\/p\u003e\u003cp\u003eTier Three Fluid Mechanics (Model A is Tier Two).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 10\"–24\" pipe\u003c\/li\u003e\n\u003cli\u003eSelf-righting roll-cage body, fillable weight port\u003c\/li\u003e\n\u003cli\u003eM14 inserts, steel or titanium ceramic (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eAvailable with swivel\u003c\/li\u003e\n\u003cli\u003eTier Three Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBottom cleaning of large storm and sanitary lines, culverts, and debris-loaded mains.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924225810800,"sku":"0010 0125-C","price":3806.31,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924225843568,"sku":"0010 0125-S","price":3517.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_238.png?v=1781796940"}],"url":"https:\/\/jetterprosupply.com\/collections\/1-1-4-inch-jetter-nozzles.oembed","provider":"JETTER PRO SUPPLY","version":"1.0","type":"link"}