{"title":"1\" Jetter Nozzles","description":"\u003ch2\u003e1\" Jetter Nozzles — Combination Trucks \u0026amp; Municipal Mains\u003c\/h2\u003e\n\u003cp\u003e1\" hose means serious water: combination and jet\/vac trucks cleaning municipal sanitary and storm systems from \u003cstrong\u003e4\" collectors up to 48\" trunk lines\u003c\/strong\u003e (nozzle family depending). At municipal flow rates, fluid efficiency is the whole ballgame — a Tier 3 nozzle turns the same tank of water into more cleaned footage, which is why \u003cstrong\u003eNASSCO Jetter Code of Practice tiers show up in bid specs\u003c\/strong\u003e. (\u003ca href=\"\/pages\/nassco-tier-3-jetter-nozzles\"\u003eFull Tier 3 guide.\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOrderable online:\u003c\/strong\u003e the \u003cstrong\u003e1\" Victory Line\u003c\/strong\u003e — Sewer, Traction, Cleaning, Rotor, Rambo (small and large), Egg, GPN, Grenade, Poking, Quattro, Long and Pendelduse. List price shown; \u003cstrong\u003ecard orders take 20% off automatically\u003c\/strong\u003e; approved dealers 30% off list; Net 30\/PO at list.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the KEG industrial range:\u003c\/strong\u003e this is the home size of the heavy hitters — \u003cstrong\u003eRoyal (98% rated efficiency, 12–48\" pipe), Torpedo (97%), OMG\u003c\/strong\u003e for deteriorated pipe, \u003cstrong\u003eSewer\u003c\/strong\u003e and \u003cstrong\u003eTraction\u003c\/strong\u003e — including \u003cstrong\u003ealuminum-body versions\u003c\/strong\u003e at roughly half the weight for easier handling. Factory-checked demo\/used units are listed here quote-first at contractor prices; new industrial pieces and fleet programs go through \u003ca href=\"\/pages\/wholesale\"\u003ewholesale \u0026amp; Net 30\u003c\/a\u003e or \u003ca href=\"\/pages\/for-municipal\"\u003emunicipal purchasing\u003c\/a\u003e (POs accepted, printable spec sheets, W-9 and origin docs).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing:\u003c\/strong\u003e large-diameter all-around = Royal; heavy bottom-of-pipe cleaning = Torpedo; compromised\/corrugated pipe = OMG; grade pulls = Traction. Smaller truck? \u003ca href=\"\/collections\/3-4-inch-jetter-nozzles\"\u003e3\/4\"\u003c\/a\u003e · biggest lines? \u003ca href=\"\/collections\/1-1-4-inch-jetter-nozzles\"\u003e1-1\/4\"\u003c\/a\u003e. Spec help: \u003ca href=\"tel:8648046637\"\u003e(864) 804-6637\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"1-inch-victory-line-cleaning-nozzle","title":"1\" Victory Line Cleaning Nozzle","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1\" Victory Line Cleaning Nozzle uses alternating forward and reverse jets that scrub the pipe wall clean in a single pass. Built for 8\"–15\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924119150960,"sku":"109003-C","price":804.47,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924119183728,"sku":"109003-S","price":677.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/a527a936abc31ad93b69b040bc9a2efc.png?v=1782764005"},{"product_id":"1-inch-victory-line-egg-nozzle-with-forward-jet","title":"1\" Victory Line Egg Nozzle with Forward Jet","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1\" Victory Line Egg Nozzle with Forward Jet uses a smooth egg-profile body and forward jet that glide through bends and penetrate soft blockages. Built for 8\"–15\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924119249264,"sku":"109214-C","price":453.23,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924119282032,"sku":"109214-S","price":350.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/f5947b6f9bf6d35ce5026bd33373723d.png?v=1782764009"},{"product_id":"1-inch-victory-line-gpn-nozzle-with-forward","title":"1\" Victory Line GPN Nozzle with Forward","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1\" Victory Line GPN Nozzle with Forward uses a general-purpose forward-and-reverse jet layout that balances penetration and cleaning. Built for 8\"–15\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924119347568,"sku":"109031-C","price":924.48,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924119380336,"sku":"109031-S","price":771.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/567ffb425158691ab51e3bbe3d4e0a98.png?v=1782764013"},{"product_id":"1-inch-victory-line-grenade-nozzle","title":"1\" Victory Line Grenade Nozzle","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1\" Victory Line Grenade Nozzle uses a compact, heavy-mass body with aggressive rear jets for maximum thrust in tough lines. Built for 8\"–15\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924119445872,"sku":"109007-C","price":995.78,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924119478640,"sku":"109007-S","price":858.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/c1535630d901299f1ab7d315c6f7fd27.png?v=1782764018"},{"product_id":"1-inch-victory-line-long-nozzle","title":"1\" Victory Line Long Nozzle","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1\" Victory Line Long Nozzle uses an extended body that tracks straight through offsets and resists flipping in the line. Built for 8\"–15\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924120002928,"sku":"109264-C","price":840.28,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924120035696,"sku":"109264-S","price":734.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/a0b218d5676e3940b36739879857e6e4.png?v=1782764024"},{"product_id":"1-inch-victory-line-pendelduse-nozzle","title":"1\" Victory Line Pendelduse Nozzle","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1\" Victory Line Pendelduse Nozzle uses an oscillating-jet design for premium, high-efficiency line cleaning. Built for 8\"–15\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924120101232,"sku":"109235-C","price":3080.03,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924120134000,"sku":"109235-S","price":2966.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/f78171f2356e00e4cbfb24cb8fa3f8eb.png?v=1782764029"},{"product_id":"1-inch-victory-line-poking-nozzle-egg-devastator","title":"1\" Victory Line Poking Nozzle (Egg Devastator)","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1\" Victory Line Poking Nozzle (Egg Devastator) uses a forward-piercing jet that punches through solid blockages before opening the line. Built for 8\"–15\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924120199536,"sku":"109222-C","price":607.93,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924120232304,"sku":"109222-S","price":457.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/058d3546195aece9606516a73cc9e6e7.png?v=1782764034"},{"product_id":"1-inch-victory-line-quattro-nozzle-w-forward-chisel","title":"1\" Victory Line Quattro Nozzle w\/ Forward (Chisel)","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1\" Victory Line Quattro Nozzle w\/ Forward (Chisel) uses four concentrated chisel jets plus a forward jet that break up hardened deposits and scale. Built for 8\"–15\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924120297840,"sku":"109058-C","price":527.26,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924120330608,"sku":"109058-S","price":444.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/45e616cfa545a70e7035d2b284d9832b.png?v=1782764038"},{"product_id":"1-inch-victory-line-large-rambo-nozzle","title":"1\" Victory Line Large Rambo Nozzle","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1\" Victory Line Large Rambo Nozzle uses a wedge body with drill point and rear jets that dissolve blockages from within. Built for 8\"–15\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924120396144,"sku":"109062-C","price":1266.18,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924120428912,"sku":"109062-S","price":1060.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/511065bad4bfe6043d5ea9ee6af3e938.png?v=1782764043"},{"product_id":"1-inch-victory-line-rotor-nozzle","title":"1\" Victory Line Rotor Nozzle","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1\" Victory Line Rotor Nozzle uses a controlled rotating jet head that delivers 360° wall-to-wall scouring. Built for 8\"–15\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924120527216,"sku":"109073-C","price":1099.36,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924120559984,"sku":"109073-S","price":882.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/394c34ca4200feaf142ac91927257315.png?v=1782764048"},{"product_id":"1-inch-victory-line-sewer-nozzle","title":"1\" Victory Line Sewer Nozzle","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1\" Victory Line Sewer Nozzle uses a high-efficiency rear-jet pattern that flushes debris and restores full-bore flow. Built for 8\"–15\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924120625520,"sku":"109041-C","price":890.43,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924120658288,"sku":"109041-S","price":698.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/5b12f7724bb53919f247cf5797c96d18.png?v=1782764052"},{"product_id":"1-inch-victory-line-traction-nozzle","title":"1\" Victory Line Traction Nozzle","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1\" Victory Line Traction Nozzle uses a forward jet plus angled rear jets that pull the hose deep into the line while cleaning. Built for 8\"–15\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924120723824,"sku":"109015-C","price":718.12,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924120756592,"sku":"109015-S","price":610.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/c240a9d6d3fdf76f8174f0119d71c6de.png?v=1782764057"},{"product_id":"1-inch-victory-line-large-quattro-nozzle-w-forward-chisel","title":"1\" Victory Line Large Quattro Nozzle w\/ Forward (Chisel)","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1\" Victory Line Large Quattro Nozzle w\/ Forward (Chisel) uses four concentrated chisel jets plus a forward jet that break up hardened deposits and scale. Built for 8\"–15\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924122689904,"sku":"109059-C","price":1301.88,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924122722672,"sku":"109059-S","price":1120.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/2dd5bf7f2ef11ce80d93cde884aa41e2.png?v=1782764071"},{"product_id":"1-inch-victory-line-rambo-nozzle-small","title":"1\" Victory Line Rambo Nozzle (Small)","description":"\u003cp\u003e\u003cstrong\u003eGerman-engineered Victory Line performance.\u003c\/strong\u003e The 1\" Victory Line Rambo Nozzle (Small) uses a wedge body with drill point and rear jets that dissolve blockages from within. Built for 8\"–15\" lines. It is available with replaceable ceramic or steel inserts for the wear life your jobs demand.\u003c\/p\u003e\u003cp\u003eVictory Line is KEG’s house brand: German-manufactured, assembled to order in Spartanburg, SC. It brings the same design discipline as the KEG catalog line in a Victory Line body, at a price built for working plumbers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eChoose replaceable ceramic (longest wear) or steel (best value) inserts\u003c\/li\u003e\n\u003cli\u003eFlow (GPM\/PSI) configured to your jetter at build\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBacked by the full Victory Line manufacturer warranty and a 90-day 100% money-back guarantee.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"Victory Line","offers":[{"title":"Ceramic","offer_id":53924122788208,"sku":"109063-C","price":589.88,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924122820976,"sku":"109063-S","price":524.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/0ef04985a469fd3e107ebfc408adc6cf.png?v=1782764075"},{"product_id":"keg-demo-one-inch-cleaning-nozzle","title":"1\" KEG Cleaning Nozzle — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Cleaning Nozzle — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e Eight threaded inserts fire at alternating 15° and 25° angles for full 360° pipe-wall coverage in a single pass, so you clean more line with less water and fewer passes.\u003c\/p\u003e\u003cp\u003eTier Three Fluid Mechanics — over 80% efficient.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003e8 threaded inserts, alternating 15° \u0026amp; 25° jet angles\u003c\/li\u003e\n\u003cli\u003eSteel or replaceable titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Three Fluid Mechanics, over 80% efficient\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRoutine sanitary and storm-line cleaning, grease cutting, and high-wall-force scrubbing.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924216078704,"sku":"0010 0003-C","price":1000.5,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924216111472,"sku":"0010 0003-S","price":879.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_121.png?v=1781796811"},{"product_id":"keg-demo-one-inch-traction-nozzle","title":"1\" KEG Traction Nozzle — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Traction Nozzle — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e Six rear jets at a tight 8° and 12° pattern pull the hose deep into long runs while cleaning the wall; add the forward penetrator to punch through sand, mud, and packed debris.\u003c\/p\u003e\u003cp\u003eTier Three Fluid Mechanics — over 80% efficient.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003e7-insert setup: 6 rear jets (8° \u0026amp; 12°) + 1 forward\u003c\/li\u003e\n\u003cli\u003eSteel or replaceable titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Three Fluid Mechanics, over 80% efficient\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eLong laterals, uphill runs, mud and sand clearance, and recycled-water truck applications.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924216242544,"sku":"0010 0015-C","price":869.85,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924216275312,"sku":"0010 0015-S","price":763.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_123.png?v=1781796814"},{"product_id":"keg-demo-one-inch-royal-nozzle","title":"1\" KEG Royal Nozzle — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Royal Nozzle — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e Twelve alternating jets at 22° and 32° deliver all-around cleaning in big lines up to 48\".\u003c\/p\u003e\u003cp\u003eTier Three Fluid Mechanics — over 95% efficient (catalog cover cites 98%).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003e12 alternating jets at 22° \u0026amp; 32°\u003c\/li\u003e\n\u003cli\u003eSteel or replaceable titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Three Fluid Mechanics, over 95% efficient\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eLarge-diameter sanitary and storm mains up to 48\".\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924216439152,"sku":"0010 0021-C","price":1765.9,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924216471920,"sku":"0010 0021-S","price":1507.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_125.png?v=1781796817"},{"product_id":"keg-demo-one-inch-torpedo-nozzle","title":"1\" KEG Torpedo Nozzle — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Torpedo Nozzle — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A weighted, aerodynamic body keeps the nozzle low and stable while eight jets at 12° and 18° strip the wall.\u003c\/p\u003e\u003cp\u003eTier Three Fluid Mechanics — over 95% efficient (catalog cover cites 97%).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003e8 jets at 12° \u0026amp; 18°\u003c\/li\u003e\n\u003cli\u003eSteel or replaceable titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Three Fluid Mechanics, over 95% efficient\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eCleaning 6\"–16\" lines (usable to 32\"), high-efficiency maintenance passes.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924216635760,"sku":"0010 0031-C","price":1477.68,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924216668528,"sku":"0010 0031-S","price":1305.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_127.png?v=1781796820"},{"product_id":"keg-demo-one-inch-cleaning-nozzle-aluminum","title":"1\" KEG Cleaning Nozzle Aluminum — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Cleaning Nozzle Aluminum — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e Eight threaded inserts fire at alternating 15° and 25° angles for full 360° pipe-wall coverage in a single pass, so you clean more line with less water and fewer passes.\u003c\/p\u003e\u003cp\u003eTier Three Fluid Mechanics — over 80% efficient.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003e8 threaded inserts, alternating 15° \u0026amp; 25° jet angles\u003c\/li\u003e\n\u003cli\u003eSteel or replaceable titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Three Fluid Mechanics, over 80% efficient\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRoutine sanitary and storm-line cleaning, grease cutting, and high-wall-force scrubbing.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924217389424,"sku":"0010 7003-C","price":1000.5,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924217422192,"sku":"0010 7003-S","price":879.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_133.png?v=1781796830"},{"product_id":"keg-demo-one-inch-traction-nozzle-aluminum","title":"1\" KEG Traction Nozzle Aluminum — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Traction Nozzle Aluminum — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e Six rear jets at a tight 8° and 12° pattern pull the hose deep into long runs while cleaning the wall; add the forward penetrator to punch through sand, mud, and packed debris.\u003c\/p\u003e\u003cp\u003eTier Three Fluid Mechanics — over 80% efficient.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003e7-insert setup: 6 rear jets (8° \u0026amp; 12°) + 1 forward\u003c\/li\u003e\n\u003cli\u003eSteel or replaceable titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Three Fluid Mechanics, over 80% efficient\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eLong laterals, uphill runs, mud and sand clearance, and recycled-water truck applications.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924217586032,"sku":"0010 7015-C","price":869.84,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924217618800,"sku":"0010 7015-S","price":763.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_135.png?v=1781796833"},{"product_id":"keg-demo-one-inch-royal-nozzle-aluminum","title":"1\" KEG Royal Nozzle Aluminum — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Royal Nozzle Aluminum — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e Twelve alternating jets at 22° and 32° deliver all-around cleaning in big lines up to 48\".\u003c\/p\u003e\u003cp\u003eTier Three Fluid Mechanics — over 95% efficient (catalog cover cites 98%).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003e12 alternating jets at 22° \u0026amp; 32°\u003c\/li\u003e\n\u003cli\u003eSteel or replaceable titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Three Fluid Mechanics, over 95% efficient\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eLarge-diameter sanitary and storm mains up to 48\".\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924217749872,"sku":"0010 7021-C","price":1765.9,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924217782640,"sku":"0010 7021-S","price":1507.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_137.png?v=1781796836"},{"product_id":"keg-demo-one-inch-torpedo-nozzle-aluminum","title":"1\" KEG Torpedo Nozzle Aluminum — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Torpedo Nozzle Aluminum — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A weighted, aerodynamic body keeps the nozzle low and stable while eight jets at 12° and 18° strip the wall.\u003c\/p\u003e\u003cp\u003eTier Three Fluid Mechanics — over 95% efficient (catalog cover cites 97%).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003e8 jets at 12° \u0026amp; 18°\u003c\/li\u003e\n\u003cli\u003eSteel or replaceable titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Three Fluid Mechanics, over 95% efficient\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eCleaning 6\"–16\" lines (usable to 32\"), high-efficiency maintenance passes.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924217946480,"sku":"0010 7031-C","price":1477.68,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924217979248,"sku":"0010 7031-S","price":1305.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_139.png?v=1781796839"},{"product_id":"keg-demo-one-inch-quattro-nozzle","title":"1\" KEG Quattro Nozzle — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Quattro Nozzle — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e Four forward jets penetrate while three sharp body edges mechanically break apart deformed pipe, sand, mud, roots, and packed debris; rear jets flush the loosened material back.\u003c\/p\u003e\u003cp\u003eTier One or Tier Two efficiency depending on size and insert configuration.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003e4 forward jets + 3 sharp cutting edges\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel body\u003c\/li\u003e\n\u003cli\u003eSteel or titanium ceramic inserts (−S \/ −C; smaller sizes factory-drilled)\u003c\/li\u003e\n\u003cli\u003eTier One–Two per size\/insert\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eTotal blockages, deformed pipe, roots, sand, and mud.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924218208624,"sku":"0010 0058-C","price":445.8,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924218241392,"sku":"0010 0058-S","price":400.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_141.png?v=1781796843"},{"product_id":"keg-demo-one-inch-quattro-nozzle-with-drill-point","title":"1\" KEG Quattro Nozzle With Drill Point — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Quattro Nozzle With Drill Point — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A replaceable stainless drill tip pre-drills three holes in the blockage while sharp body edges split it open and rear propulsion jets flush the debris back. Low maintenance, high performance on grease and total blockages.\u003c\/p\u003e\u003cp\u003eTier One or Tier Two depending on size and insert availability.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eReplaceable stainless drill tip (3 pre-drill jets)\u003c\/li\u003e\n\u003cli\u003eRear propulsion jets\u003c\/li\u003e\n\u003cli\u003eSteel or titanium ceramic on 3\/4\" \u0026amp; 1\" (smaller sizes factory-drilled)\u003c\/li\u003e\n\u003cli\u003eTier One–Two per size\/insert\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eTotal blockages, grease penetration, and tough obstructions in 2\"+ pipe.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924218732912,"sku":"0010 0059-C","price":463.53,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924218765680,"sku":"0010 0059-S","price":418.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_143.png?v=1781796846"},{"product_id":"keg-demo-one-inch-rambo-nozzle-with-forward-jets-and-drill-point","title":"1\" KEG Rambo Nozzle With Forward Jets And Drill Point — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Rambo Nozzle With Forward Jets And Drill Point — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A wedge-shaped body with a removable drill point (three rear-spraying jets) plus a forward jet dissolves blockages from within — the strongest penetrator in the industry. Pull the drill point and drop in a standard insert for thrust-only mode.\u003c\/p\u003e\u003cp\u003eTier Two Nozzle (3\/4\"+); smaller sizes are Tier One.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eWedge body with removable\/replaceable drill point\u003c\/li\u003e\n\u003cli\u003eThree rear jets + forward jet\u003c\/li\u003e\n\u003cli\u003eSteel or titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Two (3\/4\"+), Tier One on smaller sizes\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eTotal blockages, root masses, grease plugs, and emergency service calls. Sanitary and storm.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924218929520,"sku":"0010 0063-C","price":957.61,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924218962288,"sku":"0010 0063-S","price":803.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_145.png?v=1781796849"},{"product_id":"keg-demo-one-inch-rotor-nozzle-small","title":"1\" KEG Rotor Nozzle Small — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Rotor Nozzle Small — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A free-spinning head covers the wall in 360°, stripping the last grease film, tender roots, and scale a rear-jet nozzle leaves behind. The reversible barrel also flushes forward — the only finishing nozzle in the industry that does. Water-driven, no lubrication required.\u003c\/p\u003e\u003cp\u003eTier Two Fluid Mechanics. Not a cleaning nozzle — run it last.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eFree-spinning 360° head, reversible barrel\u003c\/li\u003e\n\u003cli\u003eWater-driven, no lubrication required\u003c\/li\u003e\n\u003cli\u003eSteel or titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Two Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003ePre-camera inspection finishing, grease and scale removal, small root remnants.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924219027824,"sku":"0010 0073-C","price":1229.98,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924219060592,"sku":"0010 0073-S","price":1075.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_147.png?v=1781796852"},{"product_id":"keg-demo-one-inch-rotor-nozzle-large","title":"1\" KEG Rotor Nozzle Large — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Rotor Nozzle Large — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A free-spinning head covers the wall in 360°, stripping the last grease film, tender roots, and scale a rear-jet nozzle leaves behind. The reversible barrel also flushes forward — the only finishing nozzle in the industry that does. Water-driven, no lubrication required.\u003c\/p\u003e\u003cp\u003eTier Two Fluid Mechanics. Not a cleaning nozzle — run it last.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eFree-spinning 360° head, reversible barrel\u003c\/li\u003e\n\u003cli\u003eWater-driven, no lubrication required\u003c\/li\u003e\n\u003cli\u003eSteel or titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Two Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003ePre-camera inspection finishing, grease and scale removal, small root remnants.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924219257200,"sku":"0010 0073L-C","price":1333.56,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924219289968,"sku":"0010 0073L-S","price":1205.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_149.png?v=1781796855"},{"product_id":"keg-demo-one-inch-duce-nozzle-large","title":"1\" KEG Duce Nozzle Large — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Duce Nozzle Large — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e Sprocket-like front and rear end caps use a vibrating, rotational action to break hard scale, grout, mortar, and tuberculation while rear jets propel it up the line.\u003c\/p\u003e\u003cp\u003eTier Two Fluid Mechanics. Flow 5–125 GPM, 1,300–2,000 PSI (varies by size).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Do not use in clay pipe. A camera inspection is recommended before use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eVibrating rotational end caps\u003c\/li\u003e\n\u003cli\u003eTitanium ceramic inserts standard (1\/4\" \u0026amp; 3\/8\" use stainless steel)\u003c\/li\u003e\n\u003cli\u003eTier Two Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eFlow 5–125 GPM, 1,300–2,000 PSI (by size)\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eScale, mineral deposits, tuberculation, and concrete buildup in 2\"+ pipe.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924219552112,"sku":"0010 0108-C","price":2358.58,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924219584880,"sku":"0010 0108-S","price":2279.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_154.png?v=1781796861"},{"product_id":"keg-demo-one-inch-egg-nozzle","title":"1\" KEG Egg Nozzle — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Egg Nozzle — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A rounded body glides through bends and offsets that stop flat-body nozzles. Run a blank in the forward port for pure cleaning, or drop in a forward jet to penetrate — two tools in one body.\u003c\/p\u003e\u003cp\u003eTier Two Fluid Mechanics.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eRounded, agile body for bends and offsets\u003c\/li\u003e\n\u003cli\u003eCleaning or forward-jet mode via replaceable inserts\u003c\/li\u003e\n\u003cli\u003eSteel or titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Two Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eResidential laterals, service lines with bends, routine cleaning and light blockage clearing.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924220043632,"sku":"0010 0214-C","price":348.15,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924220076400,"sku":"0010 0214-S","price":270.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_157.png?v=1781796864"},{"product_id":"keg-demo-one-inch-egg-devastator-with-four-forward-jets","title":"1\" KEG Egg Devastator With Four Forward Jets — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Egg Devastator With Four Forward Jets — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e Four forward jets at 30° plus three rear jets drive through blockages from the front while the rounded, 300-series hardened stainless body navigates bends and offsets.\u003c\/p\u003e\u003cp\u003eTier Two Fluid Mechanics.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003e4 forward jets at 30° + 3 rear jets\u003c\/li\u003e\n\u003cli\u003e300-series hardened stainless steel body\u003c\/li\u003e\n\u003cli\u003eSteel or titanium ceramic inserts (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eTier Two Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eResidential laterals with bends, service-line blockages, and total blockage removal.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924220240240,"sku":"0010 0222-C","price":464.13,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924220273008,"sku":"0010 0222-S","price":351.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_159.png?v=1781796867"},{"product_id":"keg-demo-one-inch-duce-nozzle-small-version","title":"1\" KEG Duce Nozzle Small Version — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Duce Nozzle Small Version — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e Sprocket-like front and rear end caps use a vibrating, rotational action to break hard scale, grout, mortar, and tuberculation while rear jets propel it up the line.\u003c\/p\u003e\u003cp\u003eTier Two Fluid Mechanics. Flow 5–125 GPM, 1,300–2,000 PSI (varies by size).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Do not use in clay pipe. A camera inspection is recommended before use.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eVibrating rotational end caps\u003c\/li\u003e\n\u003cli\u003eTitanium ceramic inserts standard (1\/4\" \u0026amp; 3\/8\" use stainless steel)\u003c\/li\u003e\n\u003cli\u003eTier Two Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eFlow 5–125 GPM, 1,300–2,000 PSI (by size)\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eScale, mineral deposits, tuberculation, and concrete buildup in 2\"+ pipe.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924220698992,"sku":"0010 1108-C","price":2279.97,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924220731760,"sku":"0010 1108-S","price":2244.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_165.png?v=1781796873"},{"product_id":"keg-demo-one-inch-floor-cleaner-6-jet-with-1-inch-swivel","title":"1\" KEG Floor Cleaner, 6 Jet, With 1\" Swivel — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Floor Cleaner, 6 Jet, With 1\" Swivel — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A self-righting roll-cage design with a fillable weight port keeps jets aimed at the invert to clear sludge, mud, rock, brick, and concrete from storm lines, culverts, and large sanitary mains.\u003c\/p\u003e\u003cp\u003eTier Three Fluid Mechanics (Model A is Tier Two).\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003eSelf-righting roll-cage body, fillable weight port\u003c\/li\u003e\n\u003cli\u003eM14 inserts, steel or titanium ceramic (−S \/ −C)\u003c\/li\u003e\n\u003cli\u003eAvailable with swivel\u003c\/li\u003e\n\u003cli\u003eTier Three Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eBottom cleaning of large storm and sanitary lines, culverts, and debris-loaded mains.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Ceramic","offer_id":53924224172400,"sku":"0010 0121-C","price":2628.14,"currency_code":"USD","in_stock":true},{"title":"Steel","offer_id":53924224205168,"sku":"0010 0121-S","price":2468.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_222.png?v=1781796917"},{"product_id":"keg-demo-one-inch-omg-nozzle","title":"1\" KEG OMG Nozzle — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG OMG Nozzle — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e Twelve jets (six at 8°, six at 12°) plus an optional forward jet clean deteriorated, corrugated-metal, or concrete pipe 12\" and up without chewing up a fragile wall.\u003c\/p\u003e\u003cp\u003eTier Three Fluid Mechanics.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for 8\"–15\" pipe\u003c\/li\u003e\n\u003cli\u003e12 rear jets (6 at 8°, 6 at 12°) + optional forward jet\u003c\/li\u003e\n\u003cli\u003eTitanium ceramic inserts only (13 total)\u003c\/li\u003e\n\u003cli\u003eTier Three Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eDeteriorated storm and sewer pipe, corrugated metal, and concrete lines 12\"+.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Default Title","offer_id":53924904796528,"sku":"0010 0266","price":2444.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_193.png?v=1781799136"},{"product_id":"keg-demo-one-inch-super-nova-chain-cutter","title":"1\" KEG Super Nova Chain Cutter — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Super Nova Chain Cutter — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A high-torque, water-driven cutter with eight rotating and four rear inserts powers through heavy roots, scaling, rust, grease, minerals, and protruding taps in 6\"–16\" pipe (to 48\" with expansion kits); it even runs in egg-shaped pipe.\u003c\/p\u003e\u003cp\u003eTier Two Fluid Mechanics. Flow 60–150 GPM, 1,700–3,000 PSI.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 rotating + 4 rear inserts, high torque\u003c\/li\u003e\n\u003cli\u003e1-1\/4\" HP swivel, titanium ceramic inserts, extra 15' chain\u003c\/li\u003e\n\u003cli\u003eFlow 60–150 GPM, 1,700–3,000 PSI\u003c\/li\u003e\n\u003cli\u003eTier Two Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eHeavy-duty root, scale, and tap removal in 6\"–16\" lines.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Default Title","offer_id":53925031510384,"sku":"0020 0400","price":8809.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_263.png?v=1781800016"},{"product_id":"keg-demo-one-inch-super-cutter-plus-200","title":"1\" KEG Super Cutter Plus 200 — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Super Cutter Plus 200 — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A water-driven chain cutter with four rotating and five rear inserts cuts roots, grease, minerals, protruding taps, and concrete in 8\"–20\" pipe (to 48\" with expansion kits).\u003c\/p\u003e\u003cp\u003eTier Two Fluid Mechanics. Flow 60–120 GPM, 1,700–3,000 PSI.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 rotating + 5 rear inserts, 3 separate chains\u003c\/li\u003e\n\u003cli\u003e1\" HP swivel, titanium ceramic inserts, extra 15' chain\u003c\/li\u003e\n\u003cli\u003eFlow 60–120 GPM, 1,700–3,000 PSI\u003c\/li\u003e\n\u003cli\u003eTier Two Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eHeavy root and scale removal in 8\"–20\" lines.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Default Title","offer_id":53925031575920,"sku":"0020 0151","price":6440.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_260.png?v=1781800019"},{"product_id":"keg-demo-one-inch-super-cutter-plus-150","title":"1\" KEG Super Cutter Plus 150 — Demo\/Used","description":"\u003cp\u003e\u003cstrong\u003e1\" KEG Super Cutter Plus 150 — genuine KEG Technologies, offered as a tested demo\/used unit.\u003c\/strong\u003e A water-driven chain cutter with four rotating and five rear inserts cuts roots, grease, PVC\/clay taps, and light mineral in 6\"–16\" pipe (to 24\" with the expansion kit).\u003c\/p\u003e\u003cp\u003eTier Two Fluid Mechanics. Flow 40–80 GPM, 1,700–3,000 PSI.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 rotating + 5 rear inserts\u003c\/li\u003e\n\u003cli\u003e1\" HP swivel, titanium ceramic inserts, extra 15' chain, skids\u003c\/li\u003e\n\u003cli\u003eFlow 40–80 GPM, 1,700–3,000 PSI\u003c\/li\u003e\n\u003cli\u003eTier Two Fluid Mechanics\u003c\/li\u003e\n\u003cli\u003eCondition: demo \/ used, fully tested, sold as-is\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eRoot cutting and descaling in 6\"–16\" lines.\u003c\/p\u003e\u003ch3\u003eDemo \/ used — sold as-is\u003c\/h3\u003e\u003cp\u003eThis is a fully functional, KEG-engineered unit in used\/demo condition. Used-equipment guarantee: if it does not work when you receive it, we’ll repair it or send another demo unit. The 90-day 100% money-back guarantee applies to all products.\u003c\/p\u003e\u003cp\u003eGerman-manufactured, assembled to order in Spartanburg, SC.\u003c\/p\u003e\u003cp\u003eShips in 1–2 business days; standard ground delivery typically arrives in 3–5 business days.\u003c\/p\u003e\u003cp\u003eNeed help matching this nozzle to your jetter’s GPM and PSI? Contact sales at \u003ca href=\"mailto:sales@jetterprosupply.com\"\u003esales@jetterprosupply.com\u003c\/a\u003e or (864) 804-6637. For order support and returns, reach \u003ca href=\"mailto:info@jetterprosupply.com\"\u003einfo@jetterprosupply.com\u003c\/a\u003e or 864-510-4227.\u003c\/p\u003e","brand":"KEG Technologies","offers":[{"title":"Default Title","offer_id":53925037080944,"sku":"0020 0242","price":5319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/5392\/5744\/files\/part_260_27e87113-0886-442c-8707-a4a78b59e803.png?v=1781800397"}],"url":"https:\/\/jetterprosupply.com\/collections\/1-inch-jetter-nozzles.oembed","provider":"JETTER PRO SUPPLY","version":"1.0","type":"link"}