KEG Duce Nozzle 1/4"
Jackhammer action in the tightest pipes. The 1/4" Duce brings rotating jet vibration to...
KEG Duce Nozzle 1/2"
For lines where standard nozzles can't cut it. The KEG Duce's jackhammer action — rotat...
KEG Duce Nozzle 3/8"
Rotating jackhammer action for stubborn buildup in 3/8" lines. The 3/8" Duce's vibratin...
KEG Egg Devastator Nozzle w/ Forward Jets 3/8"
Four forward jets for residential blockage work. The Egg Devastator's rounded body navi...
KEG Egg Devastator Nozzle 3/8"
Blockage removal built for tight residential lines. The 3/8" Egg Devastator pairs four ...
KEG Egg Devastator Nozzle 1/2"
Four forward jets, rounded body, built for angles. The Egg Devastator's egg shape slide...
KEG Quattro Nozzle w/ Drill Point 3/8"
Drill point penetration on 3/8" equipment. The 3/8" Drill Point Quattro uses a factory ...
KEG Quattro Nozzle w/ Drill Point 1/4"
Drill point capability in a 1/4" body. The 1/4" Drill Point Quattro drives a factory dr...
KEG Quattro Nozzle w/ Drill Point 1/2"
Three jets in the drill point, sharp edges on the body — built to drive through anythin...
Micro Chain Cutter Kit (1/2" HP Swivel)
Root removal and scale cutting in 2"–6" pipe. The Micro Chain Cutter with 1/2" High Pre...
KEG Duce Nozzle (Small) 1/2"
The Duce in a small 1/2" body. Same jackhammer vibration — rotating jets that break up ...
KEG Rotor Nozzle 3/8"
360° finishing power for small-diameter lines. The 3/8" Rotor spins continuously and co...
KEG Rotor Nozzle 1/4"
Finishing capability in the tightest spaces. The 1/4" Rotor is the smallest rotor in th...
KEG Rotor Nozzle 90 Degree 1/2"
Maximum wall impact for tough scale and grease. The 90° Rotor hits the pipe wall at a d...
KEG Rotor Nozzle 45 Degree 1/2"
The finishing nozzle you run before the camera. The Rotor spins 360° continuously, hitt...
KEG Traction Nozzle w/ Forward Jet 3/8"
Serious thrust on a small machine. The 3/8" Traction Nozzle uses 8° and 12° alternating...
KEG Traction Nozzle w/ Forward Jet 1/2"
When you need to punch through and pull hard. The Traction Nozzle runs 8° and 12° alter...
KEG Rambo Nozzle 3/8"
Maximum penetration in a 3/8" body. Same Rambo design — wedge body, replaceable drill p...
KEG Rambo Nozzle 1/4"
The Rambo for the tightest lines. Factory drill configuration in a 1/4" body — built fo...
KEG Rambo Nozzle 1/2"
The one you reach for when nothing else is moving the clog. The Rambo is KEG's most cap...