Find the right nozzle for your jetter and the job

Enter your machine and job details. We’ll match the nozzle’s hose size, verified flow range, pipe condition, and actual application—without guessing.

Job-specific recommendationsGPM compatibility checkNo email required

What hose connection is on your jetter?

The nozzle must match the hose connection. Check the coupling or machine manual—don’t estimate.

1/4 inch
hose 3/8 inch
hose 1/2 inch
hose

Choose your hose connection to continue.

What does your machine produce?

GPM is required because the nozzle must be jetted to the water your machine can actually supply.

Jetter GPM (required)Use the rated flow on the pump or machine plate. Jetter PSI (required)Pressure helps us flag unusual setups. Pipe sizeRecommended for the most precise result. Hose lengthRecommended so JPS can account for pressure loss. Insert material (required for 3/8 and 1/2 inch)Choose the material you want ordered. We will not guess it.

Enter valid GPM and PSI, and choose insert material for a 3/8- or 1/2-inch loadout.

What kind of line are you entering?

Pipe condition changes the right opening tool. KEG specifically identifies Traction as gentle on deteriorated pipe and designed to clear a path for other nozzles.

Pipe materialIf unknown, choose that—we will not pretend certainty. Current conditionUse camera findings when available. Line typeThis keeps the recommendation tied to the actual application. Finish standardCamera-ready work normally adds a finishing pass.

Complete all four line-condition questions.

What is the main job you need this nozzle to do?

Pick what is actually in the line—not merely the symptom at the cleanout. The plan will separate opening, cleaning, and finishing passes.

Everyday general / high-wall cleaning Mud, sand, sediment / open a path Total blockage, roots, rags or hardened mass Grease, scale, small roots / camera prep Residential service lateral / tight bends Mixed calls — build a core truck setup

Choose the job you need to solve.

Your catalog-matched job plan

Why many 3/8-inch plumbers carry both

Cleaning nozzle

The everyday Tier 3 tool for general sewer cleaning and high wall force in sanitary or storm lines. Use it when the goal is thorough pipe-wall cleaning.

Traction with forward jet

The Tier 3 path-opening tool for mud and sand removal, strong pulling, and deteriorated pipe. Use it to open and move material—not as a substitute for every cleaning job.

Cleaning and Traction are NASSCO Tier 3 nozzles with 80%+ fluid efficiency. The 98% efficiency rating belongs to the Royal nozzle and does not apply to Cleaning or Traction.