Direct Hit Sewer Jetter Nozzles & Root Cutters

Watch demonstrations ↓

What do you need to clear?

Start with the job, then check the nozzle setup for your machine.

Root cutting

DC38 and DC43 cut on the return pass. Standard C38RS and C43RS penetrate roots going forward.

Grease & hard fat

Standard RS penetrators break through grease and hard fat. DC cutters provide return cutting.

Tough blockages

Explore the forward action of the standard C38RS and C43RS penetrators.

Two-tool sets

Pair a standard RS penetrator with its matching DC cutter. Use each nozzle separately.

Before ordering, confirm your machine’s GPM and PSI, hose inside diameter and length, and connection. Final nozzle setup needs review.

Working on excavation? Explore Hydro-X HD nozzle head

Compare your shortlist

This comparison helps you shortlist tools. It does not approve a hydraulic setup. Confirm the exact configuration, material, included parts and unit availability before dispatch.

On a small screen, scroll the table sideways to see each tool.

DIRECT HIT

See the tools in action.

Choose a demonstration. See the jet pattern, the job and the tool behind it.

Play demonstration

DIRECT HIT

C43RS: forward penetration.

See the C43RS enlarging an opening through an obstruction. A penetration pass and final line cleaning are different stages.

Shop C43RS

C43RS demonstration · Jim ParisWatch on YouTube ↗

Demonstrations belong to the credited creators. Machine setup, conditions and supplied assemblies may differ. Direct Hit is available now. Confirm your assembly and setup with JPS.

Compare the nozzle to the job

Choose by the work you need to do. Then match the exact model and assembly to your machine.

Direct Hit: penetrate, cut or pair the tools

Job

Forward penetration

Model to compare C33RS · C38RS · C43RS

What makes it differentComplete penetrators with a fitted front turbo assembly and matched rear inserts. JPS can configure these offerings for either a 1/4-inch or 3/8-inch hose-end connection; confirm the complete assembly before ordering.

Job

Cut back through a blockage

Model to compare DC38 · DC43

What makes it differentComplete cutters with a carriage, feed hoses and one rear-facing turbo head. A separate penetrator is not included.

Job

Carry both stages

Model to compare C38RS + DC38
C43RS + DC43

What makes it differentTwo separate configured nozzle assemblies in each set. Match each tool to the machine. A storage case is not included.

Job

Compare an HD configuration

Model to compare C38RS HD · C43RS HD

What makes it differentComplete penetrators supplied with the fitted HD turbo assembly. Confirm the exact rotor, jetting and service parts for your setup.

33, 38 and 43 identify model families, not a guaranteed pipe fit or assembled cutter width. GPM, PSI, hose connection and clearance must match the supplied assembly.

View all Direct Hit tools and parts →

Selection notes: KEG SBK-F26 catalog and the listed Direct Hit assemblies. Product pages show the package and configuration details.

What matters after the purchase

Judge the tool by the work it covers, the parts you can service and the support behind the setup.

Service the right components

Direct Hit: Direct Hit rotor assemblies, ceramic jets and adapters are separate service items. Match the exact model and fitted configuration before ordering; a spare rotor is not included unless the listing says so.

Direct Hit parts and assemblies →

Know which coverage applies

Direct Hit manufacturer coverage must be confirmed for the exact product. KEG’s component warranty does not apply to Direct Hit.

Read model and component coverage →

Try it under the store guarantee

JPS’s 30-day performance guarantee accepts normal testing wear on a complete eligible nozzle or kit, including supplied inserts. Return all supplied components. Eligibility, exclusions and prepaid-label instructions are in the return policy.

Read the performance guarantee →

Get the right rebuild parts

A matching service kit can restore a serviceable assembly when its replaceable components are the cause of the problem. JPS can help identify the parts before you order.

Identify the exact nozzle model and fitted rotor or insert configuration. Have your order number or a clear product photo ready.
Describe what changed and your operating setup: GPM, working PSI, hose inside diameter and hose length. Stop using damaged equipment and follow the manufacturer’s inspection procedure.
Confirm the correct kit, included parts, service procedure, price and availability with JPS. A kit does not resolve every fault, and normal wear is separate from a covered defect.

Ask JPS about rebuild parts →

What a useful demonstration should show

Look for the exact nozzle and configuration, machine flow and pressure, hose, pipe condition and the work completed. Compare before-and-after inspection of the same section. One successful job does not establish a universal speed, water-use or service-life advantage.

Compare cost over your own jobs

Compare purchase price, replacement parts and service costs over the same number of jobs. Record time and water used on comparable work. A useful cost per job is total tool and service cost divided by jobs completed; any time savings should come from your own measured results.

Talk through a tool or service part: (864) 804-6637

Back to products ↑

Direct Hit builds dedicated penetrators and return cutters for different stages of sewer work. Direct Hit has arrived and is available from Jetter Pro Supply. Order online with setup support or shop in person in Spartanburg, SC.

Choose Direct Hit for the work in the line

Roots, hard fat, ice or wipes: compare the C43RS Short Penetrator. Direct Hit lists these applications for matched C43RS configurations. Its front turbo jet works on the obstruction while rear jets provide thrust and flushing.
Root cutting, grease and cleaning before relining: compare the DC43 Extreme Cutter. Its rear-facing turbo cutter provides a different working direction from the forward penetrator.
Sand, soap and grease, or pipe-wall cleaning: compare matched standard C38RS and C43RS configurations. Direct Hit lists these applications for this penetrator family; JPS checks the assembly against your line, flow and pressure.

Why choose a complete Direct Hit assembly?

You are choosing a working combination of turbo head, thrust or feed components and carriage for a specific stage of the job. Compare the included assembly below and have JPS check it against your machine and line. Suitability depends on the configuration, pipe, obstruction, flow and pressure.

See the tools work: C43RS demonstration by Jim Paris · DC43 demonstration by Jim Paris. Demonstrated setups and conditions may differ from the supplied assembly.

Open a path, then choose the cutting stage

Direct Hit’s penetrating drain and sewer nozzles work toward an obstruction. Its backward-cutting tools are designed for cutting as the tool is retrieved. Selecting the appropriate head and carriage lets the operator address a particular task rather than expecting one nozzle to do every stage.

Compare Direct Hit C43RS and DC43

C43RS Short Penetrator: a front turbo jet for penetration, with the fitted front turbo assembly and three matched rear inserts.
DC43 Extreme Cutter: rear-facing cutting on retrieval, supplied with carriage, feed hoses and one fitted rear turbo head. A C43RS penetrator is sold separately.

Watch the model-specific demonstrations on each product page and compare the listed package before ordering. Demonstrated setups can differ from the supplied assembly.

Why the complete configuration matters

A head, rotor, carriage and hose connection must work together. Compare the assembled tool, the intended pipe and obstruction, and the available flow and pressure. A model number is not a hose connection size or a universal GPM rating.

Talk through the work before choosing

Tell JPS what machine you run and whether you need penetration, cutting or preparation for relining. Choose the complete configured nozzle or head described on its product page. The listed price covers that configuration; JPS confirms the assembly and machine fit before shipment.

Ask JPS about your setup, explore KEG nozzles or shop Victory Nozzles if you need an alternative; contact us for current dispatch timing.