1/2" Victory Egg Jetter Nozzle w/ Forward Jet — Drain Cleaning
1/2" Victory Quattro Jetter Nozzle w/ Forward Chisel — Drain Cleaning
1/2" Sewer Jetter Nozzle Kit — 13-Piece Complete Drain Cleaning Set
1/2" Sewer Jetter Nozzle Kit — 5-Piece Drain Cleaning Set (KEG)
1/2" Drain Jetting Nozzle Kit — Complete Sewer Cleaning Set
1/2" Sewer Jetter Sanitation Kit — Drain & Grease Cleaning Set
1/2" Plumber Jetter Nozzle Kit — Sewer & Drain Cleaning Set
3/8" to 1/4" Jetter Hose Reducer — Nozzle Adapter Fitting
1/2" to 3/8" Jetter Hose Reducer — Nozzle Adapter Fitting
Grease lines don't respond to brute force alone — they respond to the right jet pattern. Our grease cutting nozzles are built to emulsify and sweep FOG, soft sludge, and built-up fats out of the line so it actually flows again. If you've been searching for a dependable nozzle for grease, this is where drain pros start.
Engineered by KEG Technologies, these grease and drain-line nozzles use balanced rear jets to scour the pipe wall and carry softened grease downstream instead of just punching a hole through it. That means cleaner pipe and fewer callbacks on restaurant, commercial, and residential FOG-heavy lines.
Choosing your grease nozzle
Match the nozzle to your jetter's GPM and the line diameter for the best wash-down effect. We specialize in 1/2-inch and smaller nozzles that fit the cart and trailer jetters most plumbers run on grease calls.
- Emulsifies and flushes FOG and soft sludge
- Scours pipe walls for a thorough clean
- Available in Tier 1, Tier 2 steel-insert, and Tier 3 ceramic-insert
Free shipping over $199, 2–3 day delivery from Spartanburg, SC, and warranties up to 5 years on titanium ceramic inserts. Tackling a tough grease line? Call (864) 804-6637 for a quick recommendation.
Grease playbook: open the plug with a penetrating nozzle (the Drill Point Quattro is built for grease), wash with a Cleaning Nozzle, finish 360° with a Rotor before the camera.
How to Choose a Grease-Cutting Jetter Nozzle
FOG lines — restaurant, commercial, and residential kitchen drains — respond to jet pattern, not brute force. The goal is to emulsify soft fats and sweep them downstream instead of boring a single hole. KEG heads that shine on grease include the rear-jet Cleaning Nozzle (3" to 8" and up), the oscillating Twister that scrubs the full wall, and the Drill Point Quattro for opening a packed plug. Match the grease-cutting sewer jetter nozzle to the line with these factors.
- GPM match: more flow means better wash-down — size the nozzle so your pump stays in its sweet spot.
- Pipe diameter: 2"–4" kitchen branches take a small body; 4"–8" commercial mains handle a 3/4" head.
- Job type: soft FOG wants rear jets that scour the wall; a hardened plug needs a penetrator to open it first.
- Insert choice: titanium ceramic inserts resist the abrasion of repeat grease routes far better than steel.
A NASSCO Tier 3 nozzle (80%+ efficient) converts more pressure into pipe-wall scour, which is exactly what emulsifies grease — the fluid-mechanics guide explains the seal.
Open, wash, finish: pair with root & penetrating nozzles for hardened plugs and a finishing nozzle before the camera. Tough grease line? Call (864) 804-6637.