The last pass is what the camera sees. Our flushing nozzles and finishing jetting nozzles are built for that final cleanup — sweeping loosened debris downstream and leaving the line inspection-ready after the heavy cutting is done.
Engineered by KEG Technologies, these post-camera finishing nozzles use rear-facing jets to wash the pipe wall and carry residual sediment out of the line. Run one as your closing step and you'll hand the customer a clean, clear pipe that looks right on camera the first time.
When to reach for a finishing nozzle
After you've cut roots or broken up grease, switch to a finishing head to flush the line clean. Match it to your jetter's GPM and line size so the wash-down stays effective without losing flow. Our 1/2-inch and smaller nozzles fit the cart and trailer jetters most plumbers run.
- Flushes loosened debris for a clean final pass
- Leaves lines inspection-ready for the camera
- Offered across all three KEG performance tiers
Orders over $199 ship free from Spartanburg, SC — out the door in 1–2 business days, delivered in 3–5, backed by KEG engineering and warranties up to 5 years on titanium ceramic inserts. Need a finishing nozzle to round out your kit? Call (864) 804-6637.
How finishing works: the Rotor Nozzle Guide explains the free-spinning 360° sweep, 45° vs 90° configurations, and why this is the last nozzle in before the camera.
How to Choose a Finishing & Flushing Jetter Nozzle
The final pass is what the camera sees. After the roots are cut or the grease is broken up, a rear-jet finishing and flushing jetter nozzle sweeps loosened debris downstream and leaves the line inspection-ready. KEG rear-jet Cleaning Nozzles (3" to 8" and up) and free-spinning rotor heads are purpose-built for this closing step. Pick the right one with these factors.
- Job type: finishing means flushing, not cutting — choose a balanced rear-jet head that scours the wall clean.
- Pipe diameter: size to the line you just cleaned; 3/8" and 1/2" cover most residential 3"–6" work.
- GPM match: keep flow in range so the wash-down carries sediment out instead of dropping it midline.
- Insert choice: Tier 3 titanium ceramic inserts keep the jet pattern crisp pass after pass.
A NASSCO Tier 3 nozzle (80%+ efficient) delivers a cleaner sweep for the same flow, so the pipe looks right on camera the first time — the fluid-mechanics guide covers the seal.
Finishing is the last step in a sequence: cut first with root & blockage nozzles, emulsify with grease nozzles, then flush clean. Need a finishing head to round out your kit? Call (864) 804-6637.