1/2" x 25' Jetter Leader Hose — Sewer Nozzle Extension

Twenty-five feet of reach without wearing out your main hose. Run this 1/2" leader between your jetter hose and nozzle to extend reach into tight areas and take the wear at the nozzle end — where hoses fail first — on a cheap replaceable section instead of your primary line.

The longer leader does double duty. Like any leader, it protects the main hose from the abrasion that concentrates at the nozzle end; but at 25 feet it also buys you real reach, letting you get the nozzle to the work when the reel can't be repositioned closer — through a crawlspace, around a corner, or up to an elevated cleanout. When it wears, you replace the leader, not the run of hose on the reel. That's a lot cheaper than replacing the hose that connects to your pump. Many operators keep one on permanently as a wear sacrifice, treating it as a consumable that stands between rough pipe and their expensive main line.

What It's Built For

• Extending reach into tight or awkward access points
• Protecting the main hose from abrasion at the nozzle connection
• Adding a longer replaceable buffer for demanding jobs

Specs & Compatibility

• Hose size: 1/2"
• Length: 25 feet
• Operating pressure: 2,500–4,000 PSI
• Available with male/male or male/female swivel ends

Why Pros Choose It

• Extra reach where the main hose can't be repositioned easily
• Takes the nozzle-end wear so the main hose lasts longer
• High-pressure rated for daily jetting work
• Swivel-end options to match your rig